Save time & money by testing the component first!
The Power Pro Tester is capable of accurately driving both DC and Pulsed Width Modulated (PWM) components on today’s complex vehicles from 0 – 100% to accurately test operation.
This versatile test unit is capable of driving a variety of components, to quickly check for complete movement or any seizing during operation, and monitor the current draw during all operating cycles on its integrated digital AMP read out.
- Drives both PWM and DC components;
- Delivers 0 – 40 Amps;
- 0 – 100% adjustable drive;
- Drives components ON or OFF the vehicle;
- Displays actual current draw;
- Simple to use and connect.
Typical petrol and diesel common vehicle component compatibilities for the EQP-115 are:
- Electronic EGR - Also allows for the EGR position sensor to be tested during EGR actuator operation.
- Electronic Throttle Body – This also allows for the integrated TPS units to be tested during the throttle body operation.
- Variable Intake Manifold Actuator – also using the EQP-021 can assist in “off car testing" for this actuator.
- Intake Air Control (IAC) Actuators -both on and off the vehicle
- Supply Pump - for direct fuel injection and common rail diesel systems. Must not be operated dry.
- Electric Control Regulators - for direct fuel injection and common rail diesel systems.
- EVAP Control Solenoids -both on and off the vehicle
- Cooling Fans -testing at varying speeds
- HVAC Blower Motors / Blend Doors -both on and off the vehicle
- Other actuators and motors -that can be operated by PWM or DC within the current range.
Power Supply: 11 - 18 VDC
Output Current: 0 - 40A (high side/low side drive)
Current Display: 0 - 40A (0.1A resolution)
PWM Rate: 15kHz
PWM Range: 0 - 100% duty
Over Temperature: Heat Sink > 120° F (output disabled)
Over Current: > 40A (output disabled)
Continuous On Time: 2 minutes @ 40 amps, 10 minutes @ 20 amps, 25 minutes @ 10amps, 30 minutes @ 5 amps.
1 x Tester with 7ft (2.1m) cables
2 x 3ft (0.91m) 40A Test Leads
2 x Battery Clips
2 x Alligator Clips
2 x Female Spade Probes
1 x Male Spade Probe
Weight: 0.8 kg
EQP-115 Full User Guide PDF
EQP-115 Quick Start Guide PDF
A variety of PlusQuip direct fit connectors are also available and can be purchased separately if required. These connector sets can reduce the spade terminal probing procedure and reduce test unit connection times.
A large range of Connector Sets are available from your local PlusQuip retailer or reseller.
Innovative Products – Australian Car Mechanic – (Nov-Dec 2014) PDF
Most innovative tool AAAA Expo 2015 - TAT (June 2015) PDF
Tool Test - Australian Car Mechanic - (July/Aug 2015) PDF
- EQP-016 Ignition Quick Probe – Coil Over Plug – KV and ARC Tester with Variable Sensitivity
- EQP-017 Ignition Quick Probe – KV and ARC Tester
- EQP-018 Automotive Relay Tester
- EQP-019 Hybrid Circuit Tester 12-42 Volt
- EQP-021 Vacuum Pump and Brake Bleeding Kit
- EQP-023 Oil Pressure Test Kit
- EQP-025 Electronic Fuel Injector Probe
- EQP-028 Dynamic DC Volt Probe
- EQP-100 Fuel Pressure and Flow Test Kit
- EQP-101 Oxygen Sensor Tester
- EQP-102 Automotive Multimeter and Infrared Thermometer
- EQP-105 Noid Light Set
- EQP-106 Electrical Test Connector Set – 28-Piece
- EQP-107 Common Rail Diesel Injector Return Flow Tester
- EQP-109 Relay Bypass Switch Master Kit
- EQP-110 Pierburg Fuel Pump Bench Tester
- EQP-111 Wheel Speed Sensor and Circuit Tester
- EQP-112 Off Car Ignition Coil Tester
- EQP-113 12 Volt Battery Tester
- EQP-114 Battery and Electrical System Tester with Printer
- EQP-115 Electronic EGR, Throttle Body & Actuator Tester
- EQP-117 Fuse Current Tester
- EQP-119 OBD11 Code Reader and Reset Tool
- EQP-120 Hand Held OBDII Scan Tool
- EQP-121 OBDMATE Code Reader and Reset Tool
- CPS-000 Connector and Harness Repair Kit
- EQP-001 Quick-Snap Connector Tool Kit
- EQP-002 Fuel Injector Filter Removal Tool
- EQP-004 Electrical Terminal Release Kit – 23 Piece
- EQP-015 Fuel Line Stopper Set – 12 Piece
- EQP-020 Hose Clamp Pliers
- EQP-022 Spark Plug Gauge
- EQP-024 Power Tool & Security Bit Set
- EQP-026 Terminal Cleaning Kit
- EQP-027 Pocket LED Magnetic Work Light
- EQP-122 Power Boost + Power Bank
- FSA-007 Fuel Line Repair Kit
- IJK-000 Fuel Injector Service Kit
- EQP-003 Installation Tool for Fuel Pumps
- EQP-005 Bosch AFM Extractor Tool
- EQP-006 Pierburg AFM Extractor Tools
- EQP-007 Oxygen Sensor Removal Tool 22mm (7/8”)
- EQP-008 Oxygen Sensor Wrench – 12 Point and 6 Point
- EQP-009 Oxygen Sensor Wrench – 12 Point and 6 Point – 54mm (2 1/8″) Offset
- EQP-010 Oxygen Sensor Wrench – Shielded Applications
- EQP-011 Oxygen Sensor Wrench – Standard Oxygen Sensors
- EQP-012 Oxygen Sensor Wrench – 6 Point with 9.5mm (3/8″) Drive
- EQP-013 Oxygen Sensor Thread Chaser
- EQP-014 Oxygen Sensor Thread Repair Kit
- EQP-029 Fuel line Removal and Fitting Tool
- EQP-030 Fuel Tank Lock Ring Removal Tool Kit
- EQP-031 VAG Ignition Coil Puller Kit
- REL-000 Relay Replacement Kit
- Where to Buy